Door System Sensor For Opening

CANBO M-235  Door System Sensor For Opening

 

Sensor -- one of the most indispensable accessory for automatic door and windows access control system.

 

Automatic door systems are made up of mechanical, electrical, and electronic components that work together to give hygiene and convenient access. Automatic door system includes door operator, sensors, and a control system. The door operator is in charge of opening and closing the door, while sensors detect the presence of person and objects and send the signal of the door open and close.

 

Dual technologies -- 2.4GHz Doppler microwave processor to detect the human and objects within the sensing area. Infrared safety sensors are incorporated into automatic doors to further guarantee pedestrian safety. When an object is detected by these sensors that could prevent the door from shutting entirely, the door will remain open until the blocked object is removed. With the use of this technology, accidents can be avoided and efficient and safe pedestrian traffic can be maintained.

For automatic doors, the 235/235E combination sensor combines motion detection with safety presence detection into one unit.

• Easy installation; best suited for automated sliding doors with door operation together to control the door open and close.
• Relay output control independently, one for motion detection and one for safety detection output.
• Microwave motion sensitivity and infrared safety sensing area, can be adjusted by the adjusting knob individually.
• Equipped with self-learning feature to keep track of itself and update the surrounding conditions.
• The self-learning time can be adjusted; it can be set to 15 seconds or 30 minutes.
• The background update time and NO/NC signal can be adjusted using a DIP switch.

Power Input: AC/DC 12~30V(±10%)
Max Installation Height: 2500mm
Static Current: 65mA
Action Current: 130mA
Operation Indicate: Standby: blue LED; Detection: red LED
Dimension: 260.3(L)*53.4(W)*44(H)mm

Infrared Safety
Ray Type: Infrared modulated light, Infrared 940nm
Quantity Of Ray: 8 rays transmitting, 8 rays receiving
Detection Range: 1600(W) * 800(D)mm

 

Microwave Motion
Frequency: 24.125GHz
Transmission frequency density: <5mW/cm2
Detection Range: 4m(W) * 2m(D)

 

M-235 sensor installs easily and fast wiring.
1, Comfirm the appropriate position, drill mounting and wire holes by the mounting template.
2, Remove the cover, mounting sensor and tighten the screws.
3, Wiring to the door controller and test the sensor.
4, Replace the cover.

In the installation, some tips should be noted.
a) This sensor's maximum installation height is 2.5 meters, so don't mount higher than 2.5 meters.
b) Mount within 100mm from the bottom line of the door head.
c) Don't place any objects which may move in the detection range.

 

The motion function is detected by the 24.125GHz microwave module. The width and depth of microwave motion sensing area can be controlled by adjusting knob. Turn clockwise to adjust the sensitivity more strong; Turn counterclockwise to adjust the sensitivity more weak. The detection range is about 4m(W) * 2m(D).

 

And the safety function is detected by the infrared 940nm modulated light, 8 rays transmitting, 8 rays receiving. The width and depth of infrared safety sensing area can be controlled by adjusting screw. Turn clockwise to adjust the detection range moved inward.Turn counterclockwise to adjust the detection range moved outward.The detection range is about 1.6(W) * 0.8(D)m

 

 

1, Quality Control
Since its establishment in 2006, Shenzhen Winfor Canbo Technology Co., Ltd. has been a leader in the automatic door access control accessories market. The company has a thorough production and testing process, excellent quality control, manufacturer direct supply, and after-sales guarantees.

 

2, More favourable pricing
We are a manufacturer that integrates R&D, manufacturing, and sales. It will be more equitable and demonstrate the sincerity of our long-term partnership if we adopt tiered pricing and factory supplies at a lower price.

 

3, a single-stop shop
To date, our team has a more complete product line centered around the automatic door system to satisfy the various needs of clients. We also continuously develop new products and offer customization. Our team has a defined organizational structure and firm goals.

 

 

Q1. Are you a manufacturer? Where is your factory located?
A: Yes, we are a manufacturer of automatic door accessories, integrating design, research, test, production, sale processes. And our factory is located in Longgang district, Shenzhen City, China. Welcome to tour. Or first you can also visit our company website: www.canbosensor.com

 

Q2.Can you send catalog and samples to me?
A: Yes, no problem, we have a complete product catalogue and price list, please contact us and we will send it to you soon. Or any demands please let us know, we could recommend more suitable model for you.

 

Q3: For our current specific usage scenarios, could you recommend some product combinations for us?
A: Sure, our sales team have all taken professional product and scene training, and our products can be used flexibly. Please contact us and let us know your site situations and needs, thank you.

 

 

Hot Tags: door system sensor for opening, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample,