Home / Products / Motion Sensor / Infrared Motion Sensor / Details

Embedded Mini Motion Detector for Sliding Door

This embedded mini motion detector for sliding door, it is consist of detector and receiver for each set, one sensor can be installed on the ceiling each inside and outside of the automatic door, and can be connected with the same one receiver.

Send Inquiry Chat Now

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Infrared motion sensor

262-01

As a passive pyroelectric infrared sensor, it is usually used in small automatic door for activation function, like concealed mounting in the ceiling.

Product features

1, Split design, installation and adjustment are more flexible.

2, Inductive head use in-line mounting design, does not affect the product appearance.

3, Adopt the whole set of passive detector imported from Germany, strong anti-interference ability and high sensitivity.

4, With signal contact normally open and normally close output, convenient to connect various automatic doors.

Technical parameter:

Working Voltage	AC/DC 12-30 (-0%+15%)
Static Current	7.8mA
Working Current	33mA(DC 12V)
Environment temperature	-40C-60C
Maximum installation height	2.8 meters
Induction lowest moving speed	0.1m/s
Output holding time	1.3S
Controller size	110mm X 30mm X 15mm
Detector size	38mm X 23mm X 21mm
Hole size	13mm
Cable length	2 meters
Detection range	2000mm(L), 800-1000mm(D) (Install height= 2.8 m)

262-02

Package and Transportation

After all products are completed, they will be tested one by one before packaging, and then enter the packaging process. Each product will be put into a clear plastic bag, and then put them into the inner box together with matching accessories.

We support all kinds of transportation mode, by air, by sea, by express, etc.

262-03 transportation

Q&A

Q: Can it be installed on automatic doors?

A: No. In order to make sure its good performance, please install it embedded on the ceiling and not exceed the maximum installation height of 2.8M.

Q: Can it be used for large automatic doors?

A: This sensor is mainly used for small automatic sliding doors. For large automatic doors, we have other models that can meet your needs. Such as M-204G, M-235, M-507, M-530, M-LV801. etc.

262-04 Q&A_