Laser Safety Curtain Sensor For Automatic Door
CANBO M-227L Laser Safety Curtain Sensor For Automatic Door Product Application Suitable for 90° swing door, revolving door, other induction door etc, as a safety presence function; Compared with infrared sensor, more fast response speed and more accurate, and it can accurately detect the human...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
CANBO M-227L Laser Safety Curtain Sensor For Automatic Door
Product Application
Suitable for 90° swing door, revolving door, other induction door etc, as a safety presence function; Compared with infrared sensor, more fast response speed and more accurate, and it can accurately detect the human body or objects in the automatic door moving area and avoid collisions.
Overall Characteristics
1, The TOF technology is used to accurately detect the appearance of the objects(human body), which plays the function of safety presence, anti-collision and safety detection.
2, Industrial grade enhanced laser tubes, less laser exitation attenuation, no need to do state detection between the door machine, long standby, more convenient.
3, With strong adaptive ability to environmental deformation, temperature, vibration and other factors, excellent anti-sunlight interference performance, long and stable operation.
4, With visible positioning red dot, easy installation and debugging, clear beam protection position and range.
5, Complied with EN16005 standard.
Product Dimension
310x31x20mm,
620x31x20mm,
750x31x20mm,
900x31x20mm,
1200x31x20mm
(Optional)
Product overview
① End cover
② Filter front cover
③ Aluminum housing
④ Mounting Brackets
⑤ Indicator light
⑥ Positioning red dot
⑦ Transmitting cabin
⑧ Receiving cabin
⑨ Positioning red dot switch
⑩ Scan range close to ground switch
⑪ Scanning range away from ground switch
⑬ Connection socket
⑫ Wire interface x 2
Adjustment
1, Adjust the scanning range by button
The scanning range total 7 levels, push button once, one beep voice, scanning range increase or decrease about 5cm, if you hear two beep voice, it's mean the scanning range is to the limit.
2, Working mode: Normally mode, stable mode
The stable mode is recommended when there are unstable environmental factors such as floating blades, complex ground, and rainy days. The factory default is normal mode.
3, Tilt angle:
When install it on the door leaf, recommended that the tilt angle of sensor will be ≥15°,ensure laser beam doesn't scan the door leaf, sensor detection will be more stable.
EN16005 standard
Complied with EN16005 standard, test signal input settings:
1. When you press and hold the “Red spot ON/OFF” switch for 5 seconds, you will hear a long beep. The test signal is switched to a high level.
2. When you press and hold the “Red spot ON/OFF” switch for 5 seconds, you will hear continuous short beeps. The test signal is switched to low level.
Output signal normally open(NO) /normally closed(NC) switching settings:
1. After short pressing the “Red spot ON/OFF” switch 6 times within 3 seconds, a long beep is heard, and the signal output switches to NC mode.
2. After short pressing the “Red spot ON/OFF” switch 6 times within 3 seconds, you will hear a continuous short beeps, and the signal output will switch to NO mode.
Company & Factory
Shenzhen Winfor Canbo Technology Co.,Ltd is a professional factory specializing in auto door control and access&attendance products. We have extensive experience in the development of automatic door control systems and product market application. "Canbo" (CANBO) series automatic door controlling products are widely used in auto door control systems, commercial/office building access control and attendance checking systems, bank management systems, and medical purification control systems.
CANBO products are regularly supplied to many large scale automatic door manufactures, engineer contractors, and export merchants due to their strong applicability, high stability, and exquisite appearance. Since our products have been sold to domestic and international markets such as Europe, the United States, and Asian markets, Winfor Canbo Company has established itself as a globalized professional manufacturer in this field. Winfo Canbo focuses on providing high quality, advanced, and pragmatic products to serve global markets in the fields of automatic door access control, intelligent security guard, and medical purification, in the spirit of innovation, pragmatic, and high efficiency.
FAQ
Q1. Can you provide products that meet CE requirements?
A: Yes, we have many product series that have passed the CE test. If the products you require need to pass the CE test or other standard, we also can arrange to send them for testing.
Q2. Do you have any promotions?
A: Yes, actually, In order to give back to old customers, we basically have a promotion every year, the time is Thanksgiving and Christmas. For specific activities, please contact us.
Q3. I want a model that is different from others. Can you design it for me?
A: Yes, we support design a unique model based on your ID or by ourselves.
Q4. The product is too expensive, can you make it cheaper for me?
A: Yes, According to your functional requirements, we can recommend our products at different price levels to you. Also, our products with step price based on the order quantity, if you can increase the order quantity, we could quote better price to you.
Hot Tags: laser safety curtain sensor for automatic door, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample,
No Information